Compression strut system
Adjustable compression struts with a central tubular section and a threaded fork end and pin connection at each end, in carbon steel and stainless steel.
M12 to M100 carbon · M12 to M56 stainless
Compression strut system
Assembly & Installation
All compression struts are supplied fully assembled and set to the nominal pin-pin length. The installed strut can be adjusted to length by +/- 50 mm.
To install follow the steps below:
- Slacken off the locking grub screw
- Install the compression strut and pins
- Adjust compression strut length if necessary
- Tighten locking grub screw